Bed Probes
Inductive, nozzle-contact, and eddy-current probes. Repeatability, Klipper support, and install difficulty.
Showing 24 of 24 probes
bd_pressure
A ~$30 strain-gauge module that auto-calibrates Pressure Advance without a test print and doubles as a nozzle probe.
Beacon RevH
Voron community standard for precision meshing and auto Z-offset
ALPS Pressure Sensor Module
Cheap nozzle-touch leveling add-on, but Goliath hotends only and thinly field-proven.
S2DW V1.0.1
USB LIS2DW accelerometer for Klipper input shaping
BD Sensor M
Budget eddy probe with real-time Z compensation and a 1.5 g coil for hot chambers; still a niche Klipper project
Super Pinda
Cheap clone of Prusa's proven SuperPINDA; fine for Prusa-style builds with steel sheets, but a niche pick for CoreXY builds
Fly ADXL
Niche Klipper ecosystem option; limited English documentation — needs verification
CNC Voron Tap V2.0
ChaoticLab CNC-machined nozzle-contact probe on an MGN7H rail
ADXL345 V2.0.1
USB ADXL345 accelerometer for Klipper input shaping
Eddy
Budget eddy current option; Cartographer is better established at similar price
Klicky PCB
Best-value probe for Voron builds; community staple with proven reliability
MicroProbe V2.0
6g deployable metal-pin probe with BLTouch wiring
CNC Voron Tap Sensor V1.0
Sensor board alone for DIY Tap builds
Cartographer
Best-value eddy current probe; strong Beacon alternative at ~1/3 the price
Euclid Probe
Solid alternative to Klicky; better hardware finish but smaller Voron community footprint
FluxHeat V6 ALPS Nozzle Probe
High-flow V6 hotend with nozzle-touch leveling built in; promising but new and unproven at scale.
Dragon Burner Peck
Experimental flexure probe for the Dragon Burner — the hotend itself is the Z probe. Not yet in beta; may never be released.
PZ Probe
Piezo nozzle-contact probe with excellent repeatability; fiddly tuning keeps it a niche pick
Voron Tap
Accurate nozzle-touch Z; installation complexity has pushed most new Voron builders to Beacon
BL Touch
Viable on Cartesian printers; outclassed in CoreXY/Voron builds
CR Touch
Creality ecosystem only; irrelevant for Voron/RatRig/VzBot builds
Eddy Tool Setter
Eddy-current tool setter module for toolchanger XY offset calibration with high repeat positioning (Klipper). Not a bed probe — it calibrates tool offsets on toolchanger printers. Board + coil/sensor module included.
IDM Scanner V3
Klipper-only eddy-current bed scanner (IDM V3), available in USB or CAN bus versions for DIY Voron and VzBot printers. Board + sensor coil in housing included.
Simple Eddy Probe
Eddy-current bed scanning probe with I2C interface (needs a free I2C port); Klipper has built-in support. Supports Tap and auto Z-offset; base frequency 5500 kHz, >400 kHz over 3mm. Board 45×23mm, coil PCB 11×22mm, 4P connector. Sensor board + coil PCB included; the USB version is a separate listing.
Nothing matches these filters
No probes are in that combination.