Filament
Material guides, brand recommendations, and troubleshooting — every filament type we cover, with real print settings.
Showing 14 of 14 materials
Polyethylene Terephthalate Glycol
PETG
PETG closes most of the gap between PLA's ease and ABS's toughness. Better heat resistance, better layer adhesion, prints on the same machines. The tradeoff is stringing and a tendency to absorb moisture faster than people expect.
Matte / Muted Finish PLA
Matte PLA
Matte PLA hides layer lines better than any other material without post-processing. The matte additive diffuses light across the surface, making individual layers effectively invisible at normal viewing distance. Paints and primes beautifully. Slightly weaker than standard PLA but otherwise identical to print.
Silk / Glossy PLA
Silk PLA
Silk PLA is standard PLA with additives that create a glossy, metallic-looking surface finish. It looks spectacular straight off the printer — like injection moulded plastic or metal. The trade-off: it's weaker than standard PLA, strings more, and bridges poorly. Use it for display pieces, not functional parts.
Carbon Fibre Reinforced PLA
PLA-CF
PLA-CF combines PLA's ease of printing with dramatically improved stiffness and a premium matte finish. The carbon fibre reinforcement makes parts feel substantially more rigid. Trade-offs: abrasive (hardened nozzle required), matte only, and more brittle than unfilled PLA.
Carbon Fibre Reinforced PETG
PETG-CF
PETG-CF gives you most of the stiffness gains of PA-CF with PETG's easier processing. No enclosure required, better heat resistance than PLA-CF, and good layer adhesion. The hardened nozzle requirement is non-negotiable.
Acrylonitrile Styrene Acrylate
ASA
ASA is what ABS should have been. Same heat resistance, better UV stability, less warping, cleaner surface finish. If you're printing anything that lives outside, ASA is the correct answer. It's not easy — you need an enclosure — but it's the most capable material you can run on a standard CoreXY.
Acrylonitrile Butadiene Styrene
ABS
ABS built the FDM industry. It's machinable, acetone-weldable, and impact tough. It's also the most unforgiving filament you'll commonly run — warps aggressively, fumes significantly, and has been largely supplanted by ASA for new designs. Run it when you need acetone smoothing, legacy fitment, or ABS-specific post-processing. Otherwise, use ASA.
Carbon Fibre Reinforced Nylon (Polyamide)
PA-CF
PA-CF is what you reach for when PETG or ASA isn't stiff enough and weight matters. The carbon fibre reinforcement dramatically improves rigidity and lowers weight-to-strength ratio. The tradeoff: it eats brass nozzles, requires a hardened steel hotend, and is among the most moisture-sensitive materials you'll run. High effort, high reward.
Nylon 12 (Polyamide)
PA12
PA12 is unfilled nylon — the flexible, fatigue-resistant cousin of PA-CF. Where PA-CF is stiff, PA12 bends and recovers. It's the right choice for parts that need to flex repeatedly without breaking — hinges, cable strain reliefs, living hinges, snap fits. Requires enclosure and active drying.
Polycarbonate
PC
Polycarbonate has the highest heat resistance of any common desktop filament — 110–130°C depending on grade. It's impact tough, optically clear in natural form, and genuinely difficult to process. Requires 300°C+ hotend, sealed enclosure at 60–70°C chamber, and an all-metal hotend. Not for beginners.
Thermoplastic Polyurethane
TPU
TPU is the flexible material category. If you need something that bends, compresses, or absorbs impact, TPU is what you're printing. Comes in hardnesses from 85A (very flexible) to 98A (semi-rigid). Processing depends entirely on your machine — bowden setups range from difficult to impossible at soft TPU grades, while direct drive runs it reliably.
Thermoplastic Elastomer
TPE
TPE is softer and more elastic than TPU — think 85A and below. It's closer to rubber than plastic. Use it for grips, gaskets, and vibration dampeners where TPU is too stiff. Requires direct drive and very slow speeds. Not for beginners.
Polyvinyl Alcohol
PVA
PVA dissolves in water, which makes it the best support material for multi-material printers. PLA prints on top of PVA supports with perfect interface — no scarring, no support removal force. Useless as a structural material. Only relevant if you have an AMS, MMU, or ERCF.
High Impact Polystyrene
HIPS
HIPS dissolves in limonene, making it an ABS-compatible soluble support material. It can also be used as a standalone material — similar print settings to ABS with slightly better impact resistance. Mostly relevant as an ABS support solution or for large-format budget structural parts.
Filament launches and news
New filament releases, brand announcements, and material coverage also appear in our News section.
Browse News →