Goliath Air
Mellow 3D

Goliath Air

Benchmark Extreme flow VzBoT's high-flow hotend — a 50mm meltzone and 100W heater, but not a beginner install.
USD $129.99
Max Temp 550°C

Full Specifications

Max Temperature 550°C
Heat Break Copper-Zirconia Bi-Material
Heat Block Nickel-Plated Copper
Nozzle Thread V6 (M6)
Mount Style Dragon Mount
Fan Size Not included
Thermistor PT1000
Heater Type Nichrome Wire
Weight 95g
Part Number GOLIATH-AIR

Pros & Cons

Pros
  • 50mm meltzone
  • 550°C maximum temp ceiling
  • 100W 24V nichrome heater for fast ramp times
  • Dragon-compatible mounting pattern — broad toolhead support
  • V6 nozzle thread
  • Bi-material copper-zirconia heatbreak
  • Open-source design by VzBoT team
Cons
  • Nichrome wire heater requires careful routing and bending
  • Fan not included — requires separate sourcing and mounting
  • Silicone sock only rated to 300°C — must be removed for high-temp use
  • M3 thermistor thread strips easily if overtightened
  • Smaller reseller network than Phaetus
  • Setup is more involved than cartridge-heater hotends

The Goliath is the hotend the VzBoT team built for their own high-speed printer. A 50mm meltzone paired with a 100W nichrome heater and a 550°C ceiling sets it apart from most hotends at this price.

The Dragon-compatible mount pattern is the key to its wide adoption. It drops into Stealthburner, XOL, Dragon Burner, and most toolheads with minimal modification. That's a significant advantage for a hotend with this kind of spec.

The installation experience is less polished than a Rapido 2. The nichrome wire needs to be routed and bent carefully — do it wrong and the wire fatigues and breaks. The PT1000 M3 thread strips easily if you overtighten. The fan is not included and needs to be sourced and mounted separately. These are manageable for an experienced builder but worth knowing before you order.

For VzBoT users it's the obvious choice. For Voron builders willing to do the setup work, it's one of the best value high-flow options available.

Where to Buy