Xol
Armchair Heavy Industries (DW-Tas)

Xol

USD $36.99

Where to buy (1)

Listed at ~$37 USD. Vendors set their own prices.

Fabreeko (opens in a new tab)

Full Specifications

Type Print-it-yourself
Included Hotend Rapido HF/UHF, Dragon HF/UHF, DropEffect XG, NF-Crazy, Revo Voron, Chube Compact
Included Extruder Sherpa Mini, G2SA, LGX Lite, Orbiter 2.0, DFA (via adapters)
Hotend Mount Style Modular — per-hotend adapter plates
Part Cooling Fans Dual 4010 axial
Compatible Printers Voron 2.4, Voron Trident

Pros & Cons

Pros
  • Lower mass than StealthBurner — better for high-accel/IS tuning; modular hotend mounts support wide hotend range; active development; good community documentation
Cons
  • Dual 4010 fans provide less static pressure than 5015 blowers — may underperform on dense overhangs; less plug-and-play than CW2-based designs; no filament cutter native

Voron fit

Xol is a community-developed Stealthburner alternative focused on reducing toolhead mass. By shaving weight from the main body and optimising the geometry, Xol achieves lower effective moving mass — which translates directly to better input shaping results and higher achievable print speeds.

The Xol project is maintained by Armchair Engineering and is one of the most actively developed community toolheads. It uses a modular carriage system called Xol-Carriage that separates the toolhead from the gantry mount, making hotend swaps faster.

For builders printing above 300mm/s regularly, Xol's mass advantage over Stealthburner is measurable. At standard speeds the difference is marginal — choose Xol if you're optimising for speed, choose Stealthburner if you want maximum community support and documentation.

Printed parts

  • Xol main body
  • Xol-Carriage (gantry mount)
  • Hotend-specific duct
  • Extruder mount (varies by extruder)

Required hardware

  • M3 heat inserts
  • M3 fasteners per BOM
  • CAN bus toolhead board recommended (EBB36 or similar)
  • ADXL345 or ADXL345 on toolhead PCB

Hotend fit

HotendMax TempFlowStatus
Rapido 2 UHF 320°C32mm³/s SUPPORTED
Dragon HF 300°C25mm³/s SUPPORTED
NF-Crazy 450°C30mm³/s SUPPORTED
Revo Voron 300°C20mm³/s LIMITED

Extruder fit

ExtruderGear RatioWeightStatus
Orbiter v2 7.5:1175g SUPPORTED
Galileo 2 9:1180g SUPPORTED
Sherpa Mini 5:185g SUPPORTED
Clockwork 2 50:17210g LIMITED · heavier

Where to Buy

Source files

GitHubArmchair-Heavy-Industries/Xol-ToolheadCommunity project: BOM, print files and build docs.(opens in a new tab)