Brazuka

Carbonara CF Tube

Contender Open-source carbon fiber X beam, up to 58% lighter than a 2020 extrusion
USD $49.99

Where to buy (1)

Listed at ~$50 USD. Vendors set their own prices.

Fabreeko (opens in a new tab)

Full Specifications

Kinematic CoreXY
Extrusion Size 2020
Printed Parts Required true

Pros & Cons

Pros
  • Up to 58% weight reduction vs a standard 2020 aluminum extrusion (64.7g for 250mm)
  • High-temperature resin — 110°C short-term resistance, good for 90°C chambers
  • Tested 800 hours at 500–1300mm/s with an 80°C chamber
  • Pre-drilled for easy installation; fully open source with CAD, STLs and BOM on GitHub
Cons
  • Printed inserts are mandatory for performance — tube alone is not a complete upgrade
  • Inserts must be printed in CF/GF filament with HDT ≥110°C and aligned facing the same direction
  • Hardware not included (separate hardware kit sold separately)

Where to Buy

Source files

GitHubBrazuka-1/Carbonara_CF_tubeCommunity project: BOM, print files and build docs.(opens in a new tab)