Gantrys
Gantry kits and conversions. Kinematics, extrusion size, motor count, and fit.
Showing 21 of 21 gantries
Ultra Light X Beam Backers
Titanium backers that stop the ultralight X beam bowing at chamber temperature
CNC XY Joint LWE Kit
CNC-machined XY joints with NSK bearings for a stiffer Voron 2.4 gantry
Carbon Fiber Y-Gantry Kit
3-tube CF Y-gantry for Voron 2.4 R1/R2
Carbon Fiber Tube X-Axis
ChaoticLab CF X-gantry tube kit for Voron 2.4
Carbonara CF Tube
Open-source carbon fiber X beam, up to 58% lighter than a 2020 extrusion
X-Gantry Square Tube (VzBoT 235/330)
VzBoT-team-authorized drop-in X tube — $31, flat to ±0.1 mm
Carbon Gantry Bar — V2.4
Budget pre-drilled carbon fiber X bar for the Voron 2.4
Titanium Backers
The single most cost-effective V2.4 and Trident upgrade — titanium strips that eliminate gantry bow from thermal expansion
X-Gantry — Voron 2.4 R2/Trident
from €35 EUR (size-dependent)
Hula Halo
Preorder — machined 440C steel halo for the Annex K3, 1333.40 CAD
Lightweight Gantry — V-Core 3.1
from $42.99 (200mm, raw aluminum)
Ultra Light X Beam with Aluminum XY Joints
Machined aluminum X beam with metal XY joints for a stiffer, lighter Voron gantry
Carbonara CF Tube Hardware Kit
Hardware-only kit from $8.99 — fasteners for Carbonara CF tubes
Reinforced Gantry Mounts
Zero-play Z joints for V2.4/Redoubt — $16.99 for all 4 corners
X-Gantry — V-Core 4
from €40 EUR (size-dependent)
Voron 2.4 CNC Parts Kit V2.0
Full CNC aluminum parts set for Voron 2.4 (AB/Z drives, joints, tensioners)
CNC X Beam — V-Core 3.1
Ultralight CNC aluminum X-beam gantry tube (3mm wall, black anodized) for the RatRig V-Core 3.1, in 300/400/500mm printer sizes (422/522/622mm actual lengths). Price is for the 300mm size.
CNC X Beam — Salad Fork
Ultralight CNC aluminum X beam gantry (260mm) for the Salad Fork 180.
CNC X Beam — Micron+
Ultralight CNC aluminum X beam gantry (250mm, 23.8g) for the Micron+, for MGN9 or MGN7 linear rails.
CNC X Beam — V-Core 4
Ultralight CNC aluminum X-beam gantry tube (3mm wall, black anodized) for the RatRig V-Core 4, in 300/400/500mm printer sizes (525/625/725mm actual lengths). Price is for the 300mm size.
CNC X Beam — Voron 0.2
Lightweight CNC aluminum X-beam tube (15×15×200mm) for the Voron 0.2, for MGN7H or MGN9C rails.
Nothing matches these filters
No gantries are in that combination.