Archetype
Armchair Heavy Industries

Archetype

USD $26.55

Where to buy (1)

Listed at ~$27 USD. Vendors set their own prices.

Jb3d (opens in a new tab)

Full Specifications

Type Print-it-yourself
Included Hotend Multiple via modular mount system
Included Extruder Multiple via modular mount system
Hotend Mount Style Archetype modular system
Part Cooling Fans Configurable
Compatible Printers Voron 2.4, Voron Trident

Pros & Cons

Pros
  • True modular design — swap components without reprinting the whole head; flexible fan duct configurations
Cons
  • Community mod — verify current development status; source URL needs confirmation

Voron fit

Not recommended as a first toolhead Archetype is designed for builders who regularly swap hotends. It is more complex to build than Stealthburner or Xol. Additional mechanical interfaces add assembly precision requirements. Start with Stealthburner if this is your first Voron build.

Archetype is a modular toolhead system by Armchair Engineering designed for builders who regularly swap hotends. Where most toolheads require printing a new hotend-specific cowl or front piece for each hotend, Archetype uses a standardised hotend mount interface — swap the hotend mount, not the entire toolhead.

This modularity comes at a cost: Archetype is more complex to build and tune than Stealthburner or Xol. The additional mechanical interfaces add potential failure points and require precise assembly. It is not recommended as a first toolhead.

For builders with a collection of hotends who want to test different configurations without a full rebuild, Archetype is the purpose-built solution. The hotend library covers all major Voron-ecosystem hotends.

Printed parts

  • Archetype main body
  • Universal carriage
  • Hotend-specific mount (one per hotend — small prints)
  • Extruder adapter

Required hardware

  • M3 heat inserts
  • Precision M3 fasteners (tolerance-critical assembly)
  • Toolhead PCB recommended
  • CAN bus recommended (reduces wiring on modular system)

Hotend fit

HotendMax TempFlowStatus
Rapido 2 UHF 320°C32mm³/s SUPPORTED
Dragon HF 300°C25mm³/s SUPPORTED
Revo Voron 300°C20mm³/s SUPPORTED
NF-Crazy 450°C30mm³/s SUPPORTED

Extruder fit

ExtruderGear RatioWeightStatus
Orbiter v2 7.5:1175g SUPPORTED
Galileo 2 9:1180g SUPPORTED
Sherpa Mini 5:185g SUPPORTED

Where to Buy

Source files

GitHubArmchair-Heavy-Industries/ArchetypeCommunity project: BOM, print files and build docs.(opens in a new tab)