Enclosures

Enclosure kits and DIY designs. Material, thickness, chamber temperature, and fit.

Showing 29 of 29 enclosures

BRS Engineering

Enclosure 2.0 Kit for V-Core 3.1

Printed locking-system parts for the V-Core 3.1 enclosure

Printed PartsASA
Fabreeko

Fabreeko Voron Panel Cutting Service

US Voron-focused vendor with stock panel kits and components — one-stop shop for panels and all Voron hardware

Panel VendorAcrylic
Generic

Twinwall Polycarbonate Panels

Corrugated dual-wall PC for improved chamber insulation — better heat retention than single-layer panels at low cost

Panel MaterialTwinwall Polycarbonate
KB3D

KB3D Voron Panel Cutting Service

US Voron-endorsed vendor with LDO panel kits and broad Voron hardware inventory

Panel VendorAcrylic
Fabreeko

Trident Inverted Electronics Acrylic Panel

Direct-fit 3mm acrylic panel for the Trident inverted-electronics mod

PanelAcrylic
MyPrintedParts

Box Turtle Enclosure Printed Parts

Printed parts for the LDO Box Turtle enclosure

Printed PartsABS
LDO

Voron 2.4 Panels

Community-approved Voron 2.4 panel kit from LDO — ACM side panels with clear front/top, correct fit guaranteed

Enclosure KitAcrylic
Generic

2mm Aluminum Sheet Panels

Highest-quality opaque panel option — rigid, no thermal limits, professional finish

Panel MaterialAluminum
Generic

3mm ACM Panels

The community’s preferred opaque panel material — aluminum face with polyethylene core, heat-resistant and rigid

Panel MaterialACM
Fabreeko

Annex K3 Acrylic Back Panel

Clean 3mm cast acrylic K3 back panel with the Annex logo engraved

PanelAcrylic
SendCutSend

Panel Cutting Service

Best custom panel vendor for US builders — upload DXF, choose material, receive precision-cut panels

Panel Vendor
Fabreeko

Acrylic Panel for Clicky-Clack Door

The standard 3mm cast acrylic panel that completes a Clicky-Clack door

PanelAcrylic
Fabreeko

K3 Style 6mm Acrylic Door for Voron

Extra-rigid 6mm K3-style acrylic door for Voron 2.4 and Trident

PanelAcrylic
Generic

XPS Foam Insulation Panels

Best insulation R-value per dollar — extruded polystyrene foam with aluminum facing for budget high-temp chamber retention

Panel MaterialXPS Foam
ChaoticLab

CNC Door Mounting Kit

ChaoticLab CNC aluminum door hinges/mounts for Voron 2.4 enclosures

Door HardwareAluminum
HoneyBadger

V0.2 Bottom & Back Panel Set

Clean laser-cut cast acrylic bottom and back panels for the V0.2

PanelAcrylic
Generic

EVA Foam Door Seal

The standard door seal for Voron — self-adhesive EVA foam compressible strip that creates a chamber-sealing gasket

SealingEVA Foam
HoneyBadger

V0.2 Clear Panel Set

Clear or smoked cast acrylic side, front and top-hat panels for the V0.2

PanelAcrylic
Generic

3mm Clear Polycarbonate Panels

The high-temp alternative to acrylic — stays clear and dimensionally stable up to 80°C chamber temperature

Panel MaterialPolycarbonate
Fabreeko

Trident Clicky-Clack Door Kit

Slick lift-off door hardware for the Trident — panel and printed parts not included

Door Hardware
Fabreeko

5mm Aluminum Structural Enclosure Panel

Premium structural aluminium panels with insulation for a rigid, high-temperature enclosure

PanelAluminum
LDO

Micron+ Colony Clacker Door Kit

Purpose-built clacker door hardware for Micron 160/180 — panel and printed parts not included

Door Hardware
Generic

3mm Clear Acrylic Panels

Standard starter panel material — cheap and easy to source, but temperature-limited and yellows over time

Panel MaterialAcrylic
Formbot

Voron 2.4 Kit Panels

Included in the Formbot V2.4 kit — functional acrylic panels that get the enclosure built, but upgrading to PC is a common follow-on

Enclosure KitAcrylic
SpannSysteme

Handle Ergo

Premium CNC aluminum handle for extrusion enclosures

Door HardwareAluminum
LDO

Box Turtle Enclosure Kit

Complete LDO enclosure kit for the Box Turtle

Enclosure KitAcrylic
Fabreeko

Micron 160 & 180 Acrylic Panel Kit

Complete cast acrylic panel set that fits both Micron 160 and 180

Enclosure KitAcrylic
LDO

V2.4 Clicky-Clack Door Kit

Slick lift-off door hardware for the V2.4 — panel and printed parts not included

Door Hardware
BRS Engineering

V-Core 3.1 + Enclosure 2.0 Full Kit

Printed-parts set for V-Core 3.1 + enclosure + EVA

Printed PartsABS

Sort & filter

Sort by
Brand
Price

Sort

Sort by

Filters

Brand
Price