RatPack HEPA Filter Module
RatRig

RatPack HEPA Filter Module

Contender RatRig's integrated in-chamber HEPA+carbon filter — polished and plug-and-play for V-Core builds, at a premium over DIY options
USD $48.99

Where to buy (1)

Listed at ~$49 USD. Vendors set their own prices.

Fabreeko (opens in a new tab)

Full Specifications

Type Recirculating
Filter Media Both
Printed Parts Required true
Fan Size 120x32 blower, 24V

Pros & Cons

Pros
  • Two-stage filtration in one unit: HEPA H13 (Small) / H14 (Large) pleated filter plus coconut activated carbon granules for VOCs and odours
  • In-chamber recirculation — scrubs chamber air during the print and for 300 seconds after, so fumes are cleared before the printer is opened
  • Native RatOS and Klipper integration — fan triggers and automations configurable in firmware
  • Two sizes: Small fits V-Core 3 and 300mm V-Core 4, Large suits 400-500mm V-Core 4; flexible mounts adapt it to other printers
  • Long filter service life: 600 hours (Small) / 900 hours (Large)
  • Open source — STLs and CAD under CC BY-NC-SA 4.0
Cons
  • Printed parts required but not included — enclosure and mounts must be printed first
  • Premium price vs DIY options: $64.99 (Large) / $48.99 (Small) before printed parts, vs ~$8-15 BOM for Nevermore Micro / BentoBox
  • Carbon is impregnated in the HEPA filter, not a refillable loose bed — the whole filter element is replaced when exhausted
  • Designed for RatRig V-Core — other printers depend on the flexible mounts fitting their enclosure

Where to Buy