Activated Carbon Pellets
NorthPrint3D

Activated Carbon Pellets

Contender The standard refill carbon for Nevermore and BentoBox builds — buy a bag and stop paying per-filter prices
USD $25.38

Where to buy (1)

Listed at ~$25 USD. Vendors set their own prices.

NorthPrint3D (opens in a new tab)

Full Specifications

Filter Media Activated Carbon

Pros & Cons

Pros
  • High-porosity steam-activated anthracite carbon (1250–1300 m²/g surface area, CTC efficiency 80 minimum)
  • The standard refill carbon for Nevermore, Rebreather, and BentoBox filter designs
  • 400g bag (~850mL) refills a Nevermore Micro (~10g) dozens of times — very low cost per refill
  • Acid-free, no sucrose-based binders; 4mm pellets for consistent bed packing
  • In stock at a Canadian vendor (NorthPrint3D), with bulk pricing available on request
Cons
  • Bulk consumable only — needs a filter unit (Nevermore, BentoBox, etc.) to be useful; not a filter on its own
  • No fan, housing, or printed parts included — just the media
  • Carbon saturates and must be replaced every few months with heavy use
  • 400g bag is far more than a single small filter needs — overkill if you only own one Nevermore Micro

Where to Buy